Norstar DR5, Installer'S Manual

Page: 74 / 534

68 Telephone relocation and replacement
Telephone relocation and
replacement
Automatic Telephone Relocation and telephone replacement are
features associated with moving and replacing
telephones in the system. The basic difference is that relocation
allows a moved telephone to retain its programming, and
replacement re-assigns or removes programming.
Automatic Telephone Relocation
Automatic Telephone Relocation is disabled by default. For
Automatic Telephone Relocation to work, the system power must
be ON and the Automatic Telephone Relocation feature must be
activated in Configuration programming.
A telephone can be moved to a new location within the
system without losing its programmed settings. The internal
numbers, settings, and Personal Speed Dial codes
remain with the telephone when it is unplugged. To move a
telephone, simply unplug it and plug it in again at another
location. Recognition of the telephone by the KSU may take up to
45 seconds.
Notes: All telephones being moved should be relocated
before new telephones are plugged into their place. This
allows the moved telephones to retain their programmed
settings. If a new telephone is plugged into the
system before the old telephone is reconnected at a new
location, will give the old telephone’s information
to the new telephone, and the old telephone will no
longer be recognized by the system. (Refer to Telephone
replacement, below.)
When changing a telephone’s internal number (in
Configuration programming), wait one minute after
Automatic Telephone Relocation.
Modular Installer Guide