manualshive.com logo in svg

Norstar DR5, Installer'S Manual

Share
Download
Norstar DR5 Installer'S Manual Download Page 131

 Data   125

Trunk Data settings apply to physical lines (001 to 

 and 

not

to target lines (081 to 184). Some Trunk Data settings may not
appear on the display during programming depending on the
type of trunk. Those that appear for a given Trunk type are

indicated in the table below.

Note: Target lines do not have any Trunk data settings. For

target lines, the physical connection information consists

of the received digit string 

 

d   ) 

used to access the

target line.

Trunk data prompts that appear for a given Trunk type

Prompt

Loop

E&M

DID

DTMF

start

Yes

Yes

Yes

Yes

Trunk mode:
Ans mode:
Ans with DISA:

Yes 
Yes

Ye8 

 

Yes

Yes 

 

Signal:

 Yes

 Yes 

 

Gain:

Yes 

 

Dial mode:

Yes

Yes 

 

Full 

Yes 

 

 

Modular DR5 Installer Guide

Summary of Contents for DR5























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands