Norstar DR5, Installer'S Manual

Page: 395 / 534

Conference 113
/ M a k e
c a l l f i r s t
Press
d 1
Notes
You have tried to use Privacy Control
when you are not on a call.
You have tried to set ‘up a conference
call while connected to only one caller.
Put your first call on hold, make a
second call, and enter the Conference
feature code again.
You have put a conference call on
hold from your
Telephone,
then tried to get another line. Your
Telephone can handle only
two lines at a time, and your
conference call is using both of them.
You have activated the Conference
feature with one call active and
another on hold. Press the line of the
call on hold to bring that person into
the conference.
Only the person who established the conference can process the
conference in any of the ways just described.
The Conference feature supports only three people.
If you are using an M7100 Telephone:
.
Your conference is connected as soon as you enter the
Conference feature code. There is no need to take the
second call off hold.
To split a conference, press (3. Then, press
to change from one caller to the other.
You cannot independently hold two calls.
You cannot join an existing two-party call to establish a
Privacy conference although you can use the Privacy
feature for calls at your telephone.
Modular DR5 System Coordinator Guide