manualshive.com logo in svg

Norstar DR5, Installer'S Manual

Share
Download
Norstar DR5 Installer'S Manual Download Page 494

212   M7324 User Card

Memory and line buttons

are 

buttons with indicators for one touch dialing, feature operation or

line access.

line of the display is reserved for display

button instructions.

cancels active calls.

appear beside active lines and features.

Using display

b u t t o n s

Display buttons change with each feature you

use. The labels for display buttons appear in

capital letters directly above them on the

second line of the display. A display button

with an “OK” label above it is represented as

OK in this card. .

DOWN UP

Button inquiry

Confirm that your memory and line buttons have the correct snap-on caps by

checking their programming.

1. Release all calls or open lines with dial tone.

2. Press 

     .

3. Press the button(s) you want to check and read the display.

4. Press 

 when finished.

Adjusting display

contrast

 Press 

      .

2. Press 

 or DOWN for the level you want.

3. Press 

 when finished.

Selecting a ring type

1. Press 

and volume level

2. Press 

   ,   or   to hear the different types of rings.

3. While the telephone is ringing, press 

 to adjust the volume.

4. Press 

 to store the ring.

louder

 Meridian and 

 are trademarks of Northern Telecom.

Modular DR5 System Coordinator Guide

Summary of Contents for DR5























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands