Norstar DR5, Installer'S Manual

Page: 509 / 534

Glossary
N
Names:
A feature that allows
you to assign System Speed
Dial numbers, external lines,
telephones, and Service Modes
in Administration programming.
You can use up to sixteen
characters to name a System
Speed Dial number, and seven
characters to name a telephone,
line, or Service Mode. If a Name
has not been assigned, the line
number or DN appears on the
display instead of a Name.
Night Service: See
Service
Modes.
Programming
Overlay:
A paper template that
is placed over the top four
memory buttons with indicators
on the M7310 or M7324
Telephone during programming.
The overlay labels indicate the
special’function that each of the
four buttons takes on during
programming.
0
On hold:
A setting that controls
whether external callers hear
music, periodic tones, or silence
when they are-placed on hold.
This setting is programmed by
your Customer Service
representative.
Overlay:
See
Programming Overlay.
P
Page:
A feature you can use to
make announcements over the
system. You can
choose Internal Page
(announce over the telephone
speakers), External Page
(announce over an
externally-mounted,
customer-supplied
loudspeaker), or both Internal
and External Page.
Page Zone:
An area in the
office that receives internal
Page announcements
independently of the rest of the
office. Each Page Zone is
identified by a number.
Telephones are assigned to
Page Zones in Administration
programming.
Park prefix: See
Call park
prefix.
Park timeout:
A delay before
an unanswered parked call
returns to the telephone that
parked it. Park timeout is set by
your Customer Service
representative. See Call Park.
Password: A
specific sequence
of digits that you enter to gain
access to programming,
to override dialing restrictions,
or to use Remote Access with
DISA. Passwords are also
required for System Startup and
Administration programming.
See of Service password.
A character that inserts
a delay in a dialing
sequence on an external line.
Modular System Coordinator Guide