Norstar DR5 Installer'S Manual Download Page 532

Page: 532 / 534

Ring

No ring

Ring

No ring

(defauit is No Line Pool)

(default is intercom keys)

None

Line #
Pool #

(maximum of 7 characters)

Restriction Index number

(maximum of 30 numbers)

Override Index number

(maximum of 10 numbers)

Full handsf ree

HF Answerback

Pickup group (defautt is NO)

Page zone (default is

Aux. Ringer

Forward no answr

Priority call

Set #

Model

Enter the

of the set to be programmed.

are

or 4 digits in

length, depending on the

length in effect (example: Set

Enter the set model (example:

Default is assignment of Lines 1 and 2 -both

on set

Enter the Line Numbers which are assigned to th:s set and will Ring

(example:

O-1 1).

Enter the Line Numbers which are assigned to this set and will not Ring

(example:

A maximum of four

may be assigned to one set.

Enter the Answer Group

(if any) which

also Ring at this set.

Enter the Answer Group

(if any) which will not Ring at this set.

Enter the Line Pool numbers that are accessible by this set

(example: 1.2.5

are NO (none), or 1 to 9 .

Enter the number of Intercom keys for this set. Options are 0 to 8.

one of the

Check the box if there is no Prime Line.

If the Prime Line is an outside line, enter the Line number.

If the Prime Line is a Line Pool, enter the Line Pool number.
Check the box if the

Line is an intercom (WC).

Assign a Name (optional) to the set (maximum of 7 characters). Use

Enter the Restriction Index number(s) (if any) to be applied.

Options are 1 to 30

Refer to page 10 for the

Restriction Index numbers which have been

Restrictions.

Enter the Override Index number(s) (if any) to be applied.

Options are 1 to 10 (example:

Refer to page 10 for the

Override Index numbers which have been assigned Overrides.

Choose if the set is to have Full Handsfree capability.

Choose if the set is to have Handsfree

Answerback capability.

Enter one Pickup Group number. Options are No (none), or 1 to 9.

Enter one Page Zone number. Options are No (none), or 1 to 8.

Choose if the telephone will activate an installed Auxiliary Ringer.

Enter

the

(if any) of the set which will receive unanswered calls.

Enter the number of rings before the unanswered call is Forwarded

(if a Forward to

is assigned), Options are

and 10.

Choose if the set is allowed to use the Priority Call feature.

Use the Copy Record to record the line settings to be copied

the

display button.

Summary of Contents for DR5























































































































































































































































































































































































































































































































































Search results

Summary of Contents for DR5

Reviews:

Brands by name

Popular brands

Norstar DR5, Installer'S Manual

Search results

Summary of Contents for DR5

Reviews:

Brands by name

Popular brands