Norstar DR5, Installer'S Manual

Page: 142 / 534

136 Line Access
Programming hints
Every Answer DN assigned to the telephone automatically
assigns an Answer button with an indicator to the telephone.
These buttons should be labeled accordingly, identifying the
telephone with its name or DN.
More than one telephone can have an Answer button for the
same DN. In this way, more than one telephone can provide
call alerting and call answering for any calls directed to that
DN.
A Private line does not generate alerting at an Answer
button.
Ringing
This setting allows you to choose:
which lines (including target lines), on the telephone being
programmed, rings for an incoming call.
which Answer on the telephone being programmed,
rings for an incoming call.
If auto-answer loop start trunks, auto-answer E&M trunks or DID
trunks are assigned to a telephone, the ringing preference has an
effect only when overflow call routing or callbacks associated
with overflow call routing occur. The ring/no ring setting has no
effect on incoming calls on the trunks that are being routed to
target lines.
Use the button to display the line you want to
program ringing for. Use the display button the
setting:
Ring
and No ring.
Programming hints
Refer to Startup for default line ringing assignments in the
the Square, Hybrid and PBX system templates.
Ensure that lines assigned to an Telephone Ring;
otherwise incoming calls on the lines cannot alert at the
telephone.
You cannot program Ringing if there are no lines or Answer
assigned to the telephone.
Modular DR5 Installer Guide