manualshive.com logo in svg

Norstar DR5, Installer'S Manual

Share
Download
Norstar DR5 Installer'S Manual Download Page 513

Glossary   231

Set Copy: 

A heading is

Configuration programming that
allows you to copy

programmable settings from

one telephone to another of the
same type. Set Copy provides

two options: duplicating System

Data and User Data, or

duplicating System Data only.

Set Copy does not provide the

same copy capability as the

display button, which is

more selective of the settings

that can be duplicated:

Set filter: 

See Dialing filter.

Set Names: 

A sub-heading in

Administration programming

that allows you to assign Names

of up to seven characters to

telephones.

 Profile: 

A feature you can

use to review the settings that

have been programmed by your

Customer Service

representative and by yourself

in Administration programming.

The settings cannot be changed

with this feature. Set Profile is

available only on the 

and M7324 Telephones.

Set Relocation: 

See Automatic

Telephone Relocation.

Shift button: 

A small triangular

button beside the dual-memory

buttons on the upper half of the

 Telephone. Press the

shift button to store or access

features on the top half of the

dual-memory buttons.

Show Time: 

A feature that

allows you see the current date
and time on the 

telephone display while you are

on a call.

Station: 

An individual telephone

or other 

 device.

Station Auxiliary Power
Supply (SAPS): 

A device which

provides power to a 

telephone that is connected

more than 305 m (1000 ft) and

less than 760 m (2500 ft) from

the Key Service Unit, or to a

CAP module.

Supervised line: 

A line for

which disconnect supervision is

enabled. If an external caller

hangs up, the 

 system

detects the disconnection and

hangs up its line also.

System Coordinator: 

A person

responsible for customizing the

 system through

Administration programming

and for helping co-workers use

the 

 system.

System Data: 

An option in the

Set Copy function. System Data

refers to the system settings

that apply to all telephones and

lines. System Data consists of

the programmable settings from

System Startup and

Administration programming. It

also includes the setting

programmed by your Customer

Service representative.

Modular 

 System Coordinator Guide

Summary of Contents for DR5























































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands