Norstar DR5, Installer'S Manual

Page: 305 / 534

Administration overview 23
Entering names
Letters and numbers can be entered as part of a name for
various settings. The method of entering a name is always the
same.
Begin with a setting that prompts you to enter a name. The
display shows a cursor ( ) to indicate where you can enter the
next character. To enter a name:
1 . Press the button on the dial pad with the printed letter or
number that you want.
Each time that you press the button, a new character is
shown on the display. For example, the button for the
number 3 has the letters D, E, and F, where:
D is shown after the first press
E is shown after the second press
F is shown after the third press
3 is shown after the fourth press
D is shown again after the fifth press.
(Letters are always shown in upper case.)
2. When the character that you want is displayed,
press or to the cursor to the next character
position.
OR
If you want to correct a character entered by mistake,
press or until the cursor is positioned beneath the
character that you want to correct.
OR
If you want to move the cursor back and delete a character,
press
3. Repeat step 1 for the remaining characters.
Modular DR5 System Coordinator Guide