Norstar DR5, Installer'S Manual

Page: 391 / 534

Camp On
109
2 2 1
/Line001
hung
UP
c a l l
Release a call
The telephone to which you camped a
call did not answer the call. The call
has come back to you. Press
or button to
reconnect to the call. On the M7100
Telephone, just pick up the receiver.
A call you camped has come back to
you, but the caller hung up before you
could reconnect.
You have no call to camp. If the call
you want to camp is on hold, take it off
hold and then camp it.
The telephone to which you have
camped a call is out of service or is
being used for Configuration or .
Administration programming. The call
has come back to you. Press
or the line button to
reconnect to the call. On the M7100
Telephone, just pick up the receiver,
The line that the camped call is on is
in use or that line does not appear at
your telephone. Release the line or
release an internal line.
Notes
If you use
Call
Queuing to answer a camped call, external calls
are answered before the camped call.
Camped calls appear on a line button on the receiving telephone,
if one is available. If not, there is just a message on the display
and Camp tones.
Modular System Coordinator Guide