Norstar DR5, Installer'S Manual

Page: 491 / 534

Shift button.
for using the top function of a dual-memory button.
The lower line of the display is reserved for display button instructions.
Dual-memory buttons
store any two features and/or numbers.
buttons
Feature button
starts or cancels a feature.
Release button
cancels active calls.
Hold button
Dial pad
Memory and line buttons
are buttons with indicators for
one touch dialing, feature
operation or line access.
Volume control
Indicators
appear beside active lines and features.
Using display
buttons
Display buttons changewith each feature you use.
C o n t r a s t l e v e l 2
The labels for display buttons appear in capital
OOWN UP OK
letters directly above them on the second line of
the display. A display button with an “OK” label
above it is represented as OK in this card.
Button inquiry
Confirm that your memory and line buttons have the correct snap-on caps by
checking their programming.
1. Release all calls or open lines with dial tone.
2. Press
3. Press the button(s) you want to check and read the display.
4. Press when finished.
Adjusting display
contrast
1. Press
2. Press UJ or DOWN for the level you want.
3. Press when finished.
Selecting a ring type
1. Press
and volume level
2. Press or to hear the different types of rings.
3. While the telephone is ringing, press
to adjust the volume.
4. Press to store the ring.
softer
louder
Meridian and are trademarks of Northern Telecom.
Modular DR5 System Coordinator Guide