Norstar DR5, Installer'S Manual

Page: 139 / 534

Data 133
Prime Telephone
This feature allows you to assign a telephone to provide backup
answering for calls on the line. Unanswered calls are redirected
to the Prime telephone. Use the display button and the
dial pad to enter the internal number of the Prime telephone.
Programming hints
For auto-answer trunks, calls ring only at the Prime
telephone for a trunk, and only when overflow call routing is
active.
Each line can be assigned only one Prime telephone.
Auxiliary Ringer
This setting allows you to turn the Auxiliary Ringer ON or OFF.
When turned ON, the Auxiliary Ringer ring for any incoming calls
that ring on the line. The Auxiliary Ringer is an optional device
that must be connected by the Installer. Use the display
button to select the setting: Y (Yes) and N (No).
Programming hints
For auto-answer trunks, calls ring only at the Prime
telephone for a trunk, and only when overflow call routing is
active.
An Auxiliary Ringer can be programmed, in the Service
Modes section of Administration programming, to ring for a
line placed into a Service Mode. An Auxiliary Ringer can also
be programmed to ring for calls to a telephone. See the
System Coordinator Guide for more information.
Privacy
This feature controls whether one user can select a line
in use at another telephone to join an existing call. The default
setting is Privacy ON, so that nobody with a
telephone
can press a line appearance on their telephone to join a call in
progress at another telephone. Use the display button
to select the setting: Y (ON) and N (OFF).
Programming hints
Privacy can also be turned ON and OFF during a call with
the Privacy feature code.
Modular Installer Guide