Norstar DR5, Installer'S Manual

Page: 473 / 534

Modular DR5 Telephone Feature Card 191
Link
Long Tones
Generates a Link signal (also called flash or recall) on an active
line to access other systems or carriers.
Permits communication with devices (such as fax or answering
machines) on an active line that use longer tone signals. The tone
lasts as long as a dial pad button is held down, and only for the
current call.
Pause
When programmed in an External sequence, inserts a
delay in a number being dialed.
For Pulse and Tone Dialing
For Pulse Dialing only
Programmed
Release
Timed
Release
W h e n p r o g r a m m e d a t t h e e n d o f a n E x t e r n a l s e q u e n c e ,
performs the same function as
Generates a longer Link signal (1.5 seconds) on an active line.
Use this feature when you want to release a call on your line but
retain the use of the line for another call.
Calling
from
outside the
office
You can use your system even when you are not in the office to make calls or use
the paging feature. You may be required to enter a Class of Service password to get onto
the system. Your Class of Service determines which features you can which
numbers you can dial.
Ask your System Coordinator for details on your Classes of Service and Class of
Service passwords.
Connecting to system:
1. Dial the remote access number provided by your System Coordinator.
2. If you hear a stuttered dial
tone, enter a 6 digit COS password.
3. When you hear a steady dial tone, you are connected to the system. You can do
one of the following:
Change your Class of Service by dialing the DN and entering a Class of
Service password.
Dial the number of someone in the office.
Enter a line pool access code to use external lines in a line pool.
Enter a Page feature code through and the appropriate
zone number to page someone in the office. See the Page feature on this card
for more information on the Page feature.
Modular DR5 System Coordinator Guide