Norstar DR5, Installer'S Manual

Page: 310 / 534

28
Names
Names
You can assign names to identify external lines, target lines and
your co-workers’ telephones. During a call, the name (if
programmed) is shown on the telephone display instead of the
external line number or internal telephone number of the caller.
Password:
speed dial
2.
Names
Telephone names
Line names
14. Direct-Dial
5. Capabilities
8 .
9. Call Seruices
Programming hints
Telephone names and line names can contain both letters and
numbers, but cannot be longer than seven characters. The # and
* symbols cannot be used.
You can give the same name to two or more telephones, or to a
telephone and a line in your system. To avoid confusion, you
should avoid such duplication. Use initials, abbreviations, or even
nicknames to give each telephone a unique name.
Two lines cannot have the same name. If you enter a line name
which has already been used, you hear an error tone, and the
display shows Use
unique name.
Modular DR5 System Coordinator Guide