Nobeltec InSight Radar 2, Installer'S Manual

Page: 23 / 76

17
Installer’s Guide
Nobeltec InSight Radar (IR2)
Installing the Control Box
After you have finished installing the scanner unit, install the Control Box in the
same way.
Find a dry weather and waterproof place within reach of the Antenna cable. Choose
a proper bolt length according to the thickness of the surface on which you are
going to install the Control Box. The hole diameter is different when using bolts or
tapping screws. When using tapping screws, drill holes in a matched size. When
using bolts and nuts, drill the holes of 6 mm (0.24 in.) diameter. When you have
finished, install the pedestal part first and then the control box.
Figure 2.8 Dimensions of the fixing hole positions
Hardware Installation