Nobeltec InSight Radar 2, Installer'S Manual

Page: 55 / 76

49
Installer’s Guide
Nobeltec InSight Radar (IR2)
1) Once on the water with the Nobeltec software running with radar and the head-
ing sensor, open the Compass deviation Adjustment tool (click on the Deviation
entry button in the Compass Heading Corrections window - shown above)
2) Steer to magnetic North.
3) With a chart window open with radar overlay turned on, observe how the radar
lines up with the chart. If the radar does not line up correctly, use the screen
above to rotate the radar image to the chart. Once lined up, hit the Add button to
add this value to the deviation table.
4) Now, change the vessel heading to another heading and repeat the process until
you feel confident that the radar image lines up with the chart at each heading.
Setting the Radar Presets
The auto gain and auto sea functions allow for hands free operation of the radar. As
with any other setting on the radar, these modes must be properly set up in order to
operate correctly. The following sections describe the presets that must be set for
proper operation.
There are several presets that affect the quality of the image. This section only
reviews those that affect the performance of the radar while using the “auto”
The PC Connection