Nobeltec InSight Radar 2, Installer'S Manual

Page: 36 / 76

30
Nobeltec InSight Radar (IR2)
Installer’s Guide
Dip switches are located inside of the IR2 interface box. Disconnect all cables and
remove the screws on the side of the box and lift off the lid to get access to the
switches. Record all switch values before making any changes. Also, make sure not
to touch any of the circuit boards.
Dip Switch New Value Meaning
S1-1
On = DHCP Client On
Off = DHCP Client Off (always use encoded IP address)
S1-2 to S1-6
These switches changes the IP address of the box from
the default value. (Make sure S1-8 is On)
Value S1-2 S1-3 S1-4 S1-5 S1-6 Offset
+ 0 (Default) Off Off Off Off Off 00000
+ 1 Off Off Off Off On 00001
+ 2 Off Off Off On Off 00010
+ 6 Off Off On On Off 00110
+ 30 On On On On Off 11110
+31 On On On On On 11111
S1-8
On = Default IP and Mac Address
Off = Enable Custom IP Address