Nobeltec InSight Radar 2, Installer'S Manual

Page: 31 / 76

25
Installer’s Guide
Nobeltec InSight Radar (IR2)
Cable #1: Radar Cable - to Control Box
The other end of Cable #1 is connected to the Control Box. Simply plug the cable
into the appropriate port on the top of the Control Box.
IR2-4D: SCAN-RMD PCB X11
IR2-4x, 6x, 12x: SCAN-OPN
PCB X11
No Color Function
1 17 Violet +250V
2 N/A
3 17 Yellow Ground
4 34 Red Ship’s +
5 34 Yellow Ship’s +
6 34 Green Ship’s -
7 34 Blue Ship’s -
IR2-4D: SCAN-RMD PCB X12
IR2-4x, 6x, 12x, 25x: SCAN-
OPN PCB X12
No Color Function
1 17 Blue +24V
2 N/A
3 34 Orange +12V
4 Braid of Red DAT-R
5 Red DAT
6
Braid of
Brown
BP/SHF-R
7 Brown BP/HG
8
Braid of
Gray
V/TRG-R
9 Gray V/TRG
Radar Control Box
Radar Connector
No Function No Function
1 +250V 9 BP/SHF-R
2 +24V 10 V/TRG
3 +12V 11 N/A
4 Ground 12 SHIP’S +
5 DAT-R 13 SHIP’S +
6 DAT 14 V/TRG-R
7 N/A 15 SHIP’S -
8 BP/SHF 16 SHIP’S -
Cable #1: Radar Connector Cable
Radar side Control Box side
Figure 2.14 Cable #1 Wiring and connector pinouts.
Hardware Installation