Nobeltec InSight Radar 2, Installer'S Manual

Page: 47 / 76

41
Installer’s Guide
Nobeltec InSight Radar (IR2)
Using the Radar Setup Wizard
This section assumes that you have correctly installed the IR2 and that it is
functioning properly.
The Insight Radar option to the Nobeltec software includes a Radar Setup Wizard
that simplifies the integration process. You must run the Radar Setup Wizard the
first time you install the software on a new computer on which you want to see the
InSight Radar.
The Wizard also sets up the communication ports for other NMEA devices such as
a GPS, heading sensor and more.
IMPORTANT NOTE FOR NETWORKS
When connecting multiple IR2 radars to the same network, you must
turn off all IR2 radars and copies of Nobeltec software connected to that
network except the IR2 radar with which you want to connect. Because,
Nobeltec Admiral can only work with a single radar at a time, multiple
radars on the same network require multiple copies of Admiral.
To launch the Radar Setup Wizard
1) Click on the Start button on your Windows task bar. Then Programs | Nobeltec |
Radar Wizard
If the Radar Setup Wizard is not in the Nobeltec program group you have not
installed the Nobeltec software with the Insight Radar module. Check to make
sure that you installed the correct CD.
2) After the opening screen appears, click on the Next button.
The PC Connection