Nitsuko NVM-2e, Installation Instructions Manual

Page: 45 / 53

Release Notes for Software Version 1.08.02
Issue 1-0 41
Changes and Additions in the System Configuration Management
Program
Dial Strings
The “W” entry (wait for dial tone) in all dial strings has changed to “S”
(Wait for Sound).
The “W” entry should not be used.
This change is found in the following parameters in the System
Configuration Managment Program:
¾ ¾ ¾ ¾
System Options
Transfer String (up to 20 digits)
Ringdown String (up to 10 digits)
RNA, Hold retrieval string (up to 20 digits)
Busy, Hold retrieval string (up to 20 digits)
Lamp On string (up to 20 digits, N-none)
Lamp off string (up to 20 digits, N-none)
Access digits before callout (up to 20 digits)
¾
¾ ¾
¾
Call Processing Parameters
DialToneStr dial string to wait for dial tone
Revisions to the Names of Various Parameters
The names of the following parameters are changed so that their
function is more clear.
¾
¾ ¾
¾
Call Processing Parameters
UseSoundAsDialTone is changed to the following:
UseSoundAsDialTone - when testing if the line is ready for dialing
¾ ¾ ¾ ¾
Tone Table
The following field was changed in the Edit Options:
CPA -Call progress Analysis result code
was changed to:
CPA -Call progress Analysis result code
Call Progress Tones: Ringback/NoAnswer = 8, Busy =7
Termination Tones: Reorder=12, Dial tone=13, Incoming fax
tone=15