Nitsuko NVM-2e, Installation Instructions Manual

Page: 37 / 53

Release Notes for Software Version 1.08
Issue 1-0 33
Changes and Additions in the System Configuration Management
Program (cont’d)
Call Processing Parameters (cont’d)
¾ ¾ ¾ ¾
CmdInputTimeout (sec) Time limit for dialing commands (for
call routing)
(Changed field)
This field sets the number of seconds of silence that elapse after the
Instruction Menu finishes playing before the Voice Mail performs the
Timeout function.
If you are using the FAX-detect dial string, you must increase this
value from 4 (the current default value) to 7. A value of 7 allows the
Voice Mail to detect the 100 Hz CNG tone that a FAX machine
generates when it calls into the system.
D
EFAULT
:
4 (seconds)
E
NTRIES
: 1 - 100 (seconds)
Note: In the NVM-2, the default value is 7.
¾ ¾ ¾ ¾
DtmfTimeout (sec) time allowed user between
dialing digits (for call routing)
(New field)
This new field sets the value in seconds of the time interval between
the caller’s dialing a digit and the Voice Mail’s prompt to the caller to
try again. Once this value is set, the Voice Mail will use it for inter-
digit dialing when directing a call.
D
EFAULT
:
5 (seconds)
E
NTRIES
: 1 - 100 (seconds)
Note: In the NVM-2, 15 seconds was the time interval between the
caller’s dialing a digit and the Voice Mail’s prompt to the caller
to try again. This timer interval could not be changed.