Nitsuko NVM-2e, Installation Instructions Manual

Page: 26 / 53

Release Notes for Software Version 1.08
22 Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
Changing Ranges of Mailboxes in the Numbering Plan (cont’d)
IMPORTANT
You need to set up all your ranges before you perform any other
Voice Mail programming. If you add a mailbox range at a later
date, you will have to re-initialize the Voice mail System. After the
re-initialization, you must re-program the entire system, and users
must re-record their personal Mailbox Greetings.
The following table shows the default numbering of the Subscriber
Mailboxes for each phone system. It is recommended that you do not
change the first Trunk Mailbox number, unless the trunks in your
phone system start with a different number.
Phone System
Default
Subscriber Mailbox Numbering
Default
First Trunk
Mailbox Number
Portrait 308/824 10-59 01
28i/124i 301-359 001
Onyx VS 300-347, 810-811 348
To change the mailbox range:
1. Connect a laptop to the Voice Mail. For instructions, see page 9.
Start up the System Configuration Management Program.
For instructions, see page 15.
The Main Menu will appear for your phone system.
The following is an example of the Main Menu:
Selected system Type: XX
Enter To view / modify
-------------------------------------
O ... system Options
R …poRt Options
G ... Global parameters
C ... Channel parameters
P ... call Processing parameters
T ... Tone table
M …Mailbox Range
Q ... Quit
>:
2. From the Main Menu, enter M and press <Enter>.