Nitsuko NVM-2e, Installation Instructions Manual

Page: 35 / 53

Release Notes for Software Version 1.08
Issue 1-0 31
Changes and Additions in the System Configuration Management
Program (cont’d)
Channel Parameters (cont’d)
¾ ¾ ¾ ¾
DTMF detection time (10 ms) during playback - Default is 5
(New field)
This field increases the sensitivity level of DTMF tones during the
playback of message (including Greetings). As a result, this field
increases the voice card’s DTMF tone recognition capability. It allows
the Voice Mail to detect those DTMF tones with a shorter duration that
may be sent from some phone systems, cordless phones, or cell phones.
D
EFAULT
: 5
E
NTRIES
:
optimal range is 4 - 8. The higher the value entered, the better
the detection of DTMF in Greetings and messages that are
being played. However, you increase the likelihood of a
talkoff occurring. (A talkoff is speech that is interpreted as
DTMF tones.)
¾ ¾ ¾ ¾
DTMF detection time (10 ms) during record - Default is 6
(New field)
This field increases the sensitivity level of DTMF tones during
recording of messages (including Greetings). As a result, this field
increases the voice card’s DTMF tone recognition capability. It allows
the Voice Mail to detect those DTMF tones with a shorter duration
level that may be sent from some phone systems, cordless phones, or
cell phones.
D
EFAULT
: 6
E
NTRIES
: optimal range is 4 - 8. The higher the value entered, the better
the detection of DTMF in Greetings and messages that are
being recorded. However, you increase the likelihood of a
talkoff occurring. (A talkoff is speech that is interpreted as
DTMF tones.)
Call Processing Parameters
The following descriptions are changes and additions to the Call
Processing Parameters portion of the System Configuration
Management Program.
Instructions are provided for accessing the Call Processing Parameters.
After these instructions, each new or changed Call Processing
Parameter is listed and described. The description for the changed Call
Processing Parameter includes only an explanation of the revision.
Complete details for the field is found in Part II: The System
Configuration Management Program in the NVM-2 Release Notes
(P/N 17690UPG01 or higher).
In addition, each description for the new or changed Call Processing
Parameter includes the default value and possible entries that you can
make.