Nitsuko NVM-2e, Installation Instructions Manual

Page: 36 / 53

Release Notes for Software Version 1.08
32 Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
Call Processing Parameters (cont’d)
To change Call Processing Parameters in the System
Configuration Management Program:
1.
Connect a laptop to the Voice Mail. For instructions, see page 9.
Start up the System Configuration Management Program.
For instructions, see page 15.
The Main Menu for your phone system will be displayed. The
following is an example of the Main Menu:
Selected system Type: Portrait
Enter To view / modify
-------------------------------------
O ... system Options
R ... poRt Options
G ... Global parameters
C ... Channel parameters
P ... call Processing parameters
T
... Tone table
M ... Mailbox Range Setup
Q ... Quit
>:
2. Press P (call Processing parameters) from the Main Menu, and
then press <Enter>.
3.
You see the field for each Call Processing Parameter. Press
<Enter> until you see the desired field you wish to edit.
4.
Enter the desired value (changes/additions are described in the
following paragraphs).
When you reach the last field and press <Enter>, you return to the
Main Menu for the System Configuration Management Program.
5. If you are finished programming the System Configuration
Management Program:
•
Press Q and <Enter>.
•
At the DOS prompt, enter VM and press <Enter> to start the
Voice Mail.