Nitsuko NVM-2e, Installation Instructions Manual

Page: 32 / 53

Release Notes for Software Version 1.08
28 Issue 1-0
Changes and Additions in the System Configuration Management
Program (cont’d)
System Options (cont’d)
¾
¾ ¾
¾
Lamp On string (up to 20 digits, N-none)
(Changed field)
This is the string that tells the Voice Mail how to turn on the Message
Lamp at a particular extension.
In the NVM-2e you have two more possible entries for these strings:
N - None
Use this code for those phone systems that do not require Message
Lamps.
H - Hang up
An “H” at the end of this string tells the Voice Mail to go off hook
and then back on hook.
Every 15 minutes the Voice Mail performs a check on all
Subscriber Mailboxes to see if they have new messages. If so, the
Voice Mail re-lights the lamp.
Some phone systems do not allow for multiple lamping to occur.
An “H” at the end of this string indicates that after checking a
Subscriber Mailbox and finding new messages, the Voice Mail will
go off hook, dial the lamp on string, and then hang up. The Voice
Mail then proceeds to the next Mailbox to perform the check.
D
EFAULT
:
Depends on the phone system that is installed.
E
NTRIES
:
Up to 20 digits, N-None
Special Codes:
F - flash
P - pause
M -
Monitor pause
X - extension
W - wait for dial tone
G - number of messages
A - analyzed pause
S - Wait for sound
H -
Hang up (If you use the “H,” be sure to place the “H”
at the end of the string.)
¾
¾ ¾
¾
Lamp Off string (up to 20 digits, N-none)
(Changed field)
This is the string that tells the Voice Mail how to turn off the Message
Lamp at a particular extension.
In the NVM-2e you have two more possible entries for these strings:
N - None
Use this code for those phone systems that do not require Message
Lamps.
H - Hang up
An “H” in the string tells the Voice Mail to go off hook and then
back on hook.