NVM-2e Installation Instructions
12
Issue 1-0
Connect a Phone System to NVM-2e (cont’d)
Note:
An alternate method for installing the 28i/124i is on the
following page.
To connect NVM-2e to a 28i, 124i, Onyx VS or Businesscom DS01
phone system:
1.
Plug one end of a modular line cord into Port 1 on the NVM-2e.
Plug the other end into an ASI or Dual ASI.
2.
Connect the ASI or Dual ASI to the phone system. Figure 7 shows
connecting to a Dual ASI.
3.
Repeat steps 1 and 2 for Port 2.
4.
Repeat steps 1 and 2 for Ports 3 and 4 if your Voice Mail contains
four ports.
Note:
Extensions will receive notification of new messages
(blinking Message Waiting lights and interrupted dial tone
for single line phones) only if Port 2 is connected to the
phone system.
1
2
24 VAC
0.7A 50-60Hz
IOIOI
NVM2exVB-C3
AC Adapter
AC Power Cord
Port 2
Port 4
Port 1
Port 3
Dual ASI
To Phone System
Figure 7: Connecting NVM-2e to a 28i, 124i, Onyx VS or Businesscom
DS01 Phone System
Summary of Contents for NVM-2e
