Nilfisk-Advance CS7000 Fuel Cell EcoFlex, Service Manual

Page: 247 / 440

Engine System, Diesel 247 Service Manual – CS7000
• Oil used in the engine should have API classification and Proper SAE Engine Oil Viscosity according to
the ambient temperatures where the engine is operated.
• With strict emission control regulations now in effect, the CF-4 and CG-4 engine oils have been developed
for use with low sulfur fuels, for On-Highway vehicle engines. When a Non-Road engine runs on high
sulfur fuel, it is advisable to use a “CF or better” classification engine oil with a high Total Base Number
(a minimum TBN of 10 is recommended).
Engine Oil Viscosity
Temperature Viscosity
Above 25 °C (77 °F) SAE 30 or SAE 10W-30
SAE 10W-40
0 °C to 25 °C (32 °F to 77 °F) SAE 20 or SAE 10W-30
SAE 10W-40
Below 0 °C (32 °F) SAE 10W or SAE 10W-30
SAE 10W-40
Cooling System
Engine Coolant
A 50/50 mix of distilled water and ethylene glycol is recommended.
Radiator Cap
13 PSI
Shop Measurements
The following information provides some “real world” shop measurements to help you recognize what
“normal” looks like.
Engine RPM Sensor
Resistance: 2.2K ohms
Output while cranking (Unplugged) - 3.0 - 5.0 VAC
Output at idle (Connected) - 10.8 VAC
Actuator
Resistance: 3.0 Ohms