![background image](http://html1.mh-extra.com/html/nidec/control-techniques-digitax-sf-da21223/control-techniques-digitax-sf-da21223_instruction-manual_1687967055.webp)
3
3. Preparation
Digitax SF
Instruction Man
ual
1. Installation
1. Motor Installation
Do not use any other screws but those in the recommended
sizes.
Motor Mounting Screws
Motor Model
Mounting
Hole
Diameter
Recommended Size
MM500,
MY500
MM101, MY101
2- ⌀ 4.5
M4 × 12 mm or more
Hexagon socket head bolt
MA201, MH201, MX201, MZ201
MA401, MH401, MX401, MZ401
4- ⌀ 5.5
M5 × 12 mm or more
Hexagon socket head bolt
MA751, MH751, MX751, MZ751
4- ⌀ 6.6
M6 × 14 mm or more
Hexagon socket head bolt
MM102, MH102,
MM152, MH152,
MM202
4- ⌀ 9
M8 × 18 mm or more
Hexagon socket head bolt
Mounting Hole
Never remove the encoder from the motor or disassemble the motor.
The motor shaft has anti-rust oil applied at the time of shipment. Before installing the motor, wipe off the oil completely
Perform precise axis alignments. Otherwise, the motor operation will cause vibration or result in shorter service life
of the motor.
Shock and Impact Force
When transporting, installing or removing the motor, do not apply excessive impact force or load.
Do not hold the encoder unit, cables, or connectors when carrying the motor.
Shock resistance of the motor is 200 m/s
2
(20
g
) or less.
During installation or operation, radial load or axial load applied to each motor has to be within the withstand rating.
When attaching a coupling to the motor shaft end or removing it, avoid direct impact by a tool such as hammer.
To remove the pulley, coupling, or any other parts from the shaft, use a puller.
Installation Precautions
Summary of Contents for Control Techniques Digitax-SF DA21223
