Nidec Control Techniques Digitax-SF DA21223, Instruction Manual

Page: 234 / 386

97
5
Settings
5. Settings
Digitax SF
Instruction Manual
５. Parameters
5.
Parameters
No. 724.0
No. 744.0
to
No. 1024.0
Internal Position:
Point table
Rotational speed (*)
Range Default Characteristics
0 to
Maximum Rotational Speed of Motor
0
[
rpm
]
Function
Use
Set the motor rotational speed for the Point Table.
No. 726.0
No. 746.0
to
No. 1026.0
Internal Position:
Point table
Acceleration time (*)
Range Default Characteristics
0 to 5,000
30
[ms]
Function
Use
Set the acceleration time for the Point table.
This item indicates the amount of time for a speed command to change from 0 [
rpm
] to 1,000 [
rpm
]. In
the default setting, it takes 90 [ms] for the rotational speed to change from 0 [
rpm
] to 3,000 [
rpm
].
No. 727.0
No. 747.0
to
No. 1027.0
Internal Position:
Point table
Deceleration time (*)
Range Default Characteristics
0 to 5,000
30
[ms]
Function
Use
Set the deceleration time for the Point Table.
This item indicates the amount of time for a speed command to change from 0 [
rpm
] to 1,000 [
rpm
]. In
the default setting, it takes 90 [ms] for the rotational speed to change from 3,000 [
rpm
] to 0 [
rpm
].
No. 728.0
No. 748.0
to
No. 1028.0
Internal Position:
Point table
Dwell time (*)
Range Default Characteristics
0 to 20,000
1
[ms]
Function
Use
Set the dwell time for the Point Table.
Dwell time is the wait time for the next Point-Table motion to be executed after a Point-Table
motion is complete.
No. 729.0
No. 749.0
to
No. 1029.0
Internal Position:
Point table
Positioning completion (*)
Range Default Characteristics
0 to 32,767
20
[encoder pulse]
Function
Use
Set the range for positioning complete by the Point table.
*）See the Point Table Parameter List to look up a point number and its corresponding parameter numbers.
Page
98
-
-
-
-
-