![background image](http://html1.mh-extra.com/html/nidec/control-techniques-digitax-sf-da21223/control-techniques-digitax-sf-da21223_instruction-manual_1687967154.webp)
17
5
…
Settings
5. Settings
3. Using the Setup Panel
3.
Using the Setup Panel
Alarm No.
Alarm that is occurring now
Alarm history
Alarm No.
History No.0
(Now)
Alarm time stamp
[ time ]
If you press
during alarm log display, alarm
occurrence hours will be displayed.
The alarm occurrence hours are as same as
the cumulative operating hours displayed under the
Alarm tab in
Digitax SF Connect
.
History No.9
Alarm that is occurring now
2. Alarm Display Mode
When an alarm occurs, the Setup Panel will automatically switch to the Alarm Display Mode.
Note that this does not happen in the following modes: Parameter Setting Mode, Quick Tuning
Mode, Auto Tuning Mode, Parameter Saving Mode, and Auxiliary Function Mode.
To switch to Alarm Display Mode from one of these modes, press
.
Status Display Mode is disabled while an alarm is occurring.
Up to 10 previous alarms can be displayed.
8
Troubleshooting
Digitax SF
Instruction Man
ual
Summary of Contents for Control Techniques Digitax-SF DA21223
