WF1947/WF1948 Instruction Manual (External Control)
188
6.1.2 General Differences in Commands (Compatibility with older WF194x
series)
It is not recommended to mix the commands of older WF194x series with the commands of
WF1947/WF1948 because each concept of channel setting differs. Additional information on the
command to be replaced is described in the detailed description for each command.
WF1947/WF1948 do not support the commands in the type 2 format of older WF194x series.
Replace with the WF1947/WF1948 commands that support
the older WF194x series commands.
[Difference of channel synchronization]
Older WF194x series can perform the 2-channel synchronization in the trigger operation, but
the WF1947/WF1948 perform the pseudo channel synchronization.
[Status System]
Contents of each operation event status register differs.
Contents of each overload event status register differs.
Contents of each warning event status register differs.
If the program is written in the system to reference the status bit in the register,
change to reference the corresponding bit assigned to each register.
For details, see "3. Status System."
[Parameter specification]
When you specify the command parameters, be sure to insert the space (code: 32) between the command
and the parameter.
Summary of Contents for Wave Factory WF1947
