NF Wave Factory WF1947, Instruction Manual

Page: 40 / 316

WF1947/WF1948 Instruction Manual (External Control)
20
2.1.2.6 Response message syntax
A response message is the data that is transmitted from the equipment in response to a query.
(A) Response message syntax
The syntax of the response message is shown in Figure 2.13.
Figure 2.13 Response Message Syntax
In response messages, commas (,) and semicolons (;) are used as separators. When multiple values are returned
by one command, the data are separated by commas (,). On the other hand, when there are multiple queries in
one program message, the data for each query are separated by semicolons (;).
(B) Response message data
The data types of response messages are as follows.
(1) Real number response data (<REAL>)
The syntax of the real number response data is shown in Figure 2.14.
Figure 2.14 Real Number Response Data (<REAL>) Syntax
The syntax of the NR2 number response data is shown in Figure 2.15.
Figure 2.15 NR2 Number Response Data (<NR2>) Syntax
,
Number
Number
<NR2>
<NR3>
;
,
NL
^END
Response
data