NF Wave Factory WF1947, Instruction Manual

Page: 302 / 316

WF1947/WF1948 Instruction Manual (External Control)
282
6.3.149 UHU/?UHU
Description
Sets/queries the user-defined unitof phase.
Parameters
The last three parameter among four can be omitted.
 The unit name
Type 1: Up to character string data of 4 characters
Type 2 (For reference): Up to character string data of 4 characters
or DEFault (handled same as "USER").
 Use/not use of LOG
Type 1 Type 2 (For reference)
0 : NONE (LOG is not used. The user setting = (original value + offset) x scale)
1 : LOGarithmic
(LOG is used. The user setting = (log (original value) + offset) x scale)
 Scale
The scaling factor: -9.9 to +9.9 (except for 0)
The exponent of the scaling factor is E-9 to E+9
 Offset
Scaling factor: -9.8 to +9.8
The exponent of the scaling factor is E-8 to E+8
Response format
Unit name, 0/1, scale, offset
Type 2 (For reference)
Settings: [:SOURce]:PHASe:USER
{<unit name>|DEFault}[,{NONE|LOGarithmic|DEFault}
[,{<scale>|DEFault}[,{<offset>|DEFault}]]]
Query: [:SOURce]:PHASe:USER?
Setting example
The name of the phase unit is "W". LOG is not used. The scale is 3.141592654. The
offset is set to 0.
Type 1: UHU “W”,0,3.141592654,0
Type 2 (For reference):PHAS:USER “W”,NONE,3.141592654,0
Note
When LOG is used, negative values cannot be set as the phase.
Compatibility Information
Compatibility support