NF Wave Factory WF1947, Instruction Manual

Page: 152 / 316

WF1947/WF1948 Instruction Manual (External Control)
132
2.3.10.4 Arbitrary waveform memory
arbitrary waveform data transfer/read-out
{:TRACe|DATA} [:DATA]
■ {:TRACe|DATA} [:DATA]
□ {:TRACe|DATA} [:DATA]?
Description
Transfers/reads out the arbitrary wave data
Setting parameter
<memory>,[<name>],<data>
<memory> ::= <INT>
<INT> → Memory number : 0 to 128
<name> ::= <STR>
<STR> → Arbitrary wave name (20 characters or less)
* Optional (if omitted, nothing is changed)
* If the arbitrary wave name is less than 20 characters, the remaining
characters are filled with spaces (with the ASCII code 32).
<data> ::= <BLK>
<BLK> → Arbitrary wave data
(Data formats)
Array format
#<digit><byte><format><number><data[0]>…<data[n-1]>
#
→ Start of the binary data
<digit> → The number of digits of subsequent <byte>
<byte> → The number of bytes of subsequent data
<format> → Data format (4 bytes)
* Specify 0 for the array format
<number> → The number of data points (4 bytes)
<data[i]> → i-th value (2 bytes)
Control point format
#<digit><byte><format><number><x[0]><y[0]>…<x[n-1]><y[n-1]>
#
→ Start of the binary data
<digit> → The number of digits of subsequent <byte>
<byte> → The number of bytes of subsequent data
<format> → Data format (4 bytes)
* Specify 1 for the control point format
<number> → The number of data points (4 bytes)
<x[i]> → x value of i-th control point (4 bytes)
<y[i]> → y value of i-th control point (2 bytes)
* Save the arbitrary data of <data> as the arbitrary wave name of <name> to the memory
number of <memory>