NF Wave Factory WF1947, Instruction Manual

Page: 303 / 316

WF1947/WF1948 Instruction Manual (External Control)
283
6.3.150 UOU/?UOU
Description
Sets/queries the user-defined unit of DC offset.
Parameters
The last three parameter among four can be omitted.
 The unit name
Type 1: Up to character string data of 4 characters
Type 2 (For reference): Up to character string data of 4 characters
or DEFault (handled same as "USER").
 Use/not use of LOG
Type 1 Type 2 (For reference)
0: NONE (LOG is not used. The user setting = (original value + offset) x scale)
1 : LOGarithmic
(LOG is used. The user setting = (log (original value) + offset) x scale)
 Scale
The scaling factor: -9.9 to +9.9 (except for 0)
The exponent of the scaling factor is E-9 to E+9.
 Offset
Scaling factor: -9.4 to +9.4
The exponent of the scaling factor is E-4 to E+4.
Response format
Unit name, 0/1, scale, offset
Type 2 (For reference)
Settings: [:SOURce]:VOLTage[:LEVel][:IMMediate]:OFFSet:USER
{<unit name>|DEFault}[,{NONE|LOGarithmic|DEFault}
[,{<scale>|DEFault}[,{<offset>|DEFault}]]]
Query: [:SOURce]:VOLTage[:LEVel][:IMMediate]:OFFSet:USER?
Setting example
The name of the DC offset unit is "kgf". LOG is not used. The scale is 9.8. The offset is
set to 0.
Type 1: UOU “kgf”,0,9.8,0
Type 2 (For reference):VOLT:OFFS:USER “kgf”,NONE,9.8,0
Note
When LOG is used, negative values cannot be set as the phase.
Compatibility Information
Compatibility support