NF Wave Factory WF1947, Instruction Manual

Page: 34 / 316

WF1947/WF1948 Instruction Manual (External Control)
14
2.1.2.4 Subsystem command syntax
The syntax of subsystem commands is shown in Figure 2.3.
Figure 2.3 Subsystem Command Syntax
(A) Keyword
The keyword in Figure 2.3 is a string of up to 12 characters consisting of uppercase and lowercase alphabetic
characters, underscore (_), and numeric characters, beginning with an alphabetic character.
Most of the keywords listed in "2.2 Command List" consist of a mixture of uppercase and lowercase letters.
Here, uppercase letters indicate the short form of keywords, while uppercase and lowercase letters indicate the
long form of keywords. Keywords are written in uppercase and lowercase letter for convenience, but actual
commands are not case sensitive. Examples for the keyword "OUTPut" are listed in Table 2.1.
Table 2.1 Keywords Accepted and Not Accepted by Equipment (for "OUTPut")
Keyword Description
OUTPUT Can be used as long form.
OUTP Can be used as short form.
OuTpUt Not case sensitive. Can be used as long form.
oUtP Not case sensitive. Can be used as short form.
OUTPU
Cannot be used because it corresponds to neither long form nor short
form.
OUT
Cannot be used because it corresponds to neither long form nor short
form.
(B) Keyword separator
The colons (:) in Figure 2.3 are interpreted as keyword separators. These keyword separators serve to separate
an upper-level keyword from a lower-level keyword in a command tree as shown in Figure 2.2.
The colon (:) at the beginning of the subsystem command is interpreted as a root specifier. This root specifier
sets the current path to the root.
,
SP :
?
:
Keyword
Parameter
Suffix