NF Wave Factory WF1947, Instruction Manual

Page: 38 / 316

WF1947/WF1948 Instruction Manual (External Control)
18
(4) String parameter (<STR>)
The syntax of string parameters is shown in Figure 2.9.
Figure 2.9 String Parameter (<STR>) Syntax
(5) Block parameter (<BLK>)
The syntax of block parameters is shown in Figure 2.10.
Figure 2.10 Block Parameter (<BLK>) Syntax
In the figure, NL is a new line character (ASCII code 10), and ^END is an EOI asserted by the last byte.
(F) Parameter separator
Parameter separators are used to separate parameters in a command which have two or more parameters.
(G) Query parameter
A query parameter is specified after "?" of query, and can be used for most of queries supported by the
commands that have numeric parameters. For example, "MINimum" or "MAXimum" is specified as query
parameter, the settable minimum value or settable maximum value can be queried, respectively.
0
0 NL ^END
-
Number other
than 0
Number Byte data
Byte data
‘ (character)
Character
other than ‘
“(character)
Character
other than “