WF1947/WF1948 Instruction Manual (External Control)
219
Sets/inquires the center value of amplitude sweep.
Cannot be set if dBV, dBm, or LOG (as user-defined unit) is selected. Returns
"INVALID" as a value, if inquired.
Parameters
The setting range is the same as amplitude setting (AMV)
Type 2 (For reference)
Settings: [:SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude]:CENTer
{<amplitude>|MINimum|MAXimum}
Query: [:SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude]:CENTer? [MINimum
|MAXimum]
Setting example
Set the center value of amplitude sweep as 5.5Vp-p/open (It is assumes that the unit of
amplitude is Vp-p, and LOAD is set as OPEN in advance).
Type 1: CTA 5.5
Type 2 (For reference):VOLT:CENT 5.5
Compatibility Information
Compatibility support
6.3.33 CTE/?CTE
Description
Inquires the center value of DC offset sweep setting/. Cannot be set if LOG is selected as
the user-defined unit. Returns "INVALID" as a value, if inquired.
Parameters
The setting range is the same as that of the DC offset setting (OFS)
Type 2 (For reference)
Settings: [:SOURce]:VOLTage[:LEVel][:IMMediate]:OFFSet:CENTer
{<offset>|MINimum|MAXimum}
Query: [:SOURce]:VOLTage[:LEVel][:IMMediate]:OFFSet:CENTer?
[MINimum|MAXimum]
Setting example
Set the center value of DC offset sweep as 0V/open (It is assumes that the unit of DC
offset is V, and LOAD is set as OPEN in advance).
Type 1: CTE 0
Type 2 (For reference):VOLT:OFFS:CENT 0
Compatibility Information
Compatibility support
Summary of Contents for Wave Factory WF1947
