NF Wave Factory WF1947, Instruction Manual

Page: 230 / 316

WF1947/WF1948 Instruction Manual (External Control)
210
6.3.17 ARB
Description
Names the waveform memory that is selected at that time to transfer the data.
If a name is omitted, the waveform data is transferred without changing the name
already exists.
In case of name only, rename the waveform memory that is selected at that time.
The waveform data can be transferred from the middle of the waveform memory by
using STT command.
Parameters
 Name of waveform memory
Up to character string data of 8 characters. A name can be omitted.
However, cannot be omitted, if the name is changed.
 Transferred data (ASCII data list, waveform data:-16384 to +16383)
ASCII data list : Waveform data[, waveform data[, waveform data...]]
Type 2 (For reference)
Settings: :DATA:DAC {<arb name>|[<arb name>]}
Query: None
Setting example
Name as “ARB_01”, and then write data with ASCII data list.
Type 1: ARB “ARB_01”,237,1779,-986,...
Type 2 (For reference):DATA:DAC “ARB_01”, 237, 1779, -986,...
Note
In case of ASCII data list, an error occurs if number of characters transferred at the same
time exceeds 1024 bytes. Insert delimiters in appropriate interval to transfer. Lines other
than the final line must be ended with "," (comma).
+16383 is set for waveform data of +16384 or higher, and -16385 is set for -16384 or
lower.
The waveform data is stored internally as a double value.
Compatibility Information
Binary data transmission is not supported.
Transfer data that binary data is converted into ASCII data list.
In addition, to transfer a data list exceeding 1024 bytes,
transfer the subsequent waveform data with the identical waveform memory name
including the command character string.
<Example>
[1st]
ARB “ARB_01”,123,456,789,…………….123,456,789,
[2nd]
ARB “ARB_01” ,987,654,321,…………….987,654,321,
:
[Final ] The end of data must be data without "," (comma).
ARB “ARB_01” ,-123,-456,-789,…………….-123,-456,-789
6.3.18 ARW