Netscout OneTouch AT G2 User Manual Download Page 376

Page: 376 / 396

OneTouch AT and OneTouch AT G2

User Manual

360



Web (HTTP)



File (FTP)



1G Wired Performance (RFC 2544)



Wi-Fi Performance



Video (RTSP)



Email (SMTP)

Setting Up and Accessing the Cloud Service

The following steps will help you set up and get started using
your Link-Live Cloud Service.

Create or sign in to your

Link-Live.com

account.

Claim

your unit.

Enable

Upload AutoTest

to send results to Link-Live.

Create a unique name for your OneTouch analyzer.

Go to Link-Live.com to manage your test results.

To begin setup from the OneTouch HOME screen, tap

TOOLS

and scroll down to

Link-Live Cloud Tools

Creating a Link-Live.com Account

To create a Link-Live.com account:

Go to

https://app.link-live.com/signup

Enter the appropriate information on the web page, and click
CREATE ACCOUNT.

Claiming Your Unit

The process to claim your analyzer includes both the unit and the
Link-Live Cloud website. You must have a user account to claim
your unit.

Summary of Contents for OneTouch AT G2













































































































































































































































































































































































































Search results

Summary of Contents for OneTouch AT G2

Reviews:

Related manuals for OneTouch AT G2

Brands by name

Popular brands

Netscout OneTouch AT G2, User Manual

Search results

Summary of Contents for OneTouch AT G2

Reviews:

Related manuals for OneTouch AT G2

Brands by name

Popular brands