manualshive.com logo in svg

Netscout OneTouch AT G2, User Manual

Share
Download
Netscout OneTouch AT G2 User Manual Download Page 295

Chapter 9: Tools

Testing Tools

279

To Save Wi-Fi Network Validation Results

You can save the results of Wi-Fi Network Validation testing for 
multiple locations and BSSIDs to a Report and send the Report to 
the Link-Live Cloud Service. 

Note

If you change the 

SSID:

 on the Wi-Fi NETWORK 

VALIDATION screen, all previous Wi-Fi Network 

Validation results are cleared and discarded. Save a 

Report with your results before switching to a new 

network/SSID. A pop-up notification will warn you 

before the analyzer discards the previous results.

Tap the OneTouch AT shortcut button at the top right of the 
analyzer screen to access the SAVE REPORT button and screen.

See “Reports” on

 page 300

 in this chapter for details on how to 

save Report options.

Summary of Contents for OneTouch AT G2













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands