Netscout OneTouch AT G2 User Manual Download

Page: 330 / 396

OneTouch AT and OneTouch AT G2

User Manual

314

Update Software

To prevent problems caused by losing power during a software
update, supply power to the OneTouch analyzer with the AC
adapter.

Updating Software Using a USB Drive or SD card

To update software, download the new software image file from

http://enterprise.netscout.com.

You can install the new software

image file from a USB flash drive or an SD card.

On the HOME screen, tap

TOOLS .

Scroll down to the Maintenance Tools section and tap

Software Update

Navigate to the directory where you saved the new software
image (

.img

) file and select the file.

Select the

button.

Select

YES

to install the new file.

The new file will be installed and the analyzer will restart. The
process will take several minutes.

Updating Software via Link-Live Cloud Service

Starting with OneTouch version 6.5.1, you can download updates
from Link-Live if your OneTouch is claimed. (See also “Link-Live
Cloud Service” on

page 359

.) To download major releases, you

must have Gold Support.

On the HOME screen, tap

TOOLS .

Scroll down to the Maintenance Tools section and tap

Software Update

On the Update Software screen, touch the

CHECK UPDATE

button. A pop-up dialog box informs you if an updated
firmware version is available.

Touch

YES

to download the firmware.

Summary of Contents for OneTouch AT G2













































































































































































































































































































































































































Search results

Summary of Contents for OneTouch AT G2

Reviews:

Related manuals for OneTouch AT G2

Brands by name

Popular brands

Netscout OneTouch AT G2, User Manual

Search results

Summary of Contents for OneTouch AT G2

Reviews:

Related manuals for OneTouch AT G2

Brands by name

Popular brands