Netscout OneTouch AT G2, User Manual

Page: 76 / 396

OneTouch AT and OneTouch AT G2
User Manual
60
When AutoTest completes, the OneTouch analyzer retains its
wired and Wi-Fi connections (link and IP address), and wired
analysis begins.
If “Enable Wi-Fi” is set to “Off,” the OneTouch analyzer will not
connect to an AP, and when AutoTest completes Wi-Fi analysis
(scanning) will begin.
When you run AutoTest again, the following actions occur.

The wired and Wi-Fi links are dropped.

Infrastructure test results, user test results, and wired
discovery results are cleared.

The wired link is re-established.

If the OneTouch analyzer is configured to connect to a Wi-Fi
network, the Wi-Fi link is re-established.

Wired and Wi-Fi IP addresses are requested.

All network infrastructure tests and user tests are re-run.

The shortcut bar (at the top of the screen) turns green to
indicate all tests passed, or red to indicate that one or more
tests failed.
Next Steps
View Other Test Results
To view the results of other tests, return to the HOME screen and
tap the test’s icon.
Run Path Analysis, Browse to, or Telnet/SSH to a Test’s
Target Server
To run path analysis to a user test’s target server, launch a
browser against the target server, or Telnet/SSH to the server, tap
the TOOLS button
on the test’s RESULTS screen.
The following tests offer these tools:
Gateway Test