Netscout OneTouch AT G2, User Manual

Page: 393 / 396

Chapter 14: Specifications
377
The exposure standard for wireless devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
Tests for SAR are conducted using standard operating positions
specified by the FCC with the device transmitting at its highest
certified power level in all tested frequency bands. The SAR limit
set by the FCC is 1.6 W/kg. The international guidelines state that
the SAR limit for mobile devices used by the public is 2.0 W/kg
averaged over 10 grams of body tissue. SAR values may vary
depending on national reporting requirements and the network
band. Although the SAR is determined at the highest certified
power level, the actual SAR level of the device while operating
can be well below the maximum value because the device
operates at multiple power levels and uses only the power
required to reach the network.
SAR information on this model device is on file with the FCC and
can be found under the Display Grant section http://www.fcc.gov/
oet/fccid after searching on FCC ID: WA7-AR5BHB112 and

FCC ID: WA7-43460AC.
This device is a 2.4 GHz wideband transmission system
(transceiver), intended for use in all EU member states and EFTA
countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national
spectrum authorities in order to obtain authorization to use the
device for setting up outdoor radio links and/or for supplying
public access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in
France and in some areas the RF output power may be limited to
10 mW EIRP in the frequency range of 2454 MHz to 2483.5 MHz.
For detailed information the end-user should contact the national
spectrum authority in France.