Netscout OneTouch AT G2 User Manual Download Page 367

Page: 367 / 396

Chapter 11: Managing Files

Remote User Interface and File Access

351

Note

You cannot delete, rename, move, or upload files

using a Web Browser.

Remote File Access Using an FTP Client

To connect to the OneTouch analyzer’s user file system with an
FTP Client:

Obtain the IP address of the management port as described
on

page 308

Provide the OneTouch analyzer’s management port IP address
to the FTP client.

Always use Anonymous as the user name, even if you have
User/Password security enabled.

If you have User/Password security enabled, then use the
password entered there. Otherwise, leave the password
empty.

Once connected, your FTP client will be able to browse the
OneTouch analyzer’s files.

Remote File Access Using a Mapped Network Drive

(WebDAV)

The OneTouch AT supports integration of its user file system into
Windows Explorer as a network drive.

The following instructions explain how to map to the analyzer's
user file system from a Windows computer.

Obtain the IP address of the management port as described
on

page 308

Select the Windows

Start

button, or open

File Explorer.

Right-click

Computer

This PC

Select

Map network drive...

Summary of Contents for OneTouch AT G2













































































































































































































































































































































































































Search results

Summary of Contents for OneTouch AT G2

Reviews:

Related manuals for OneTouch AT G2

Brands by name

Popular brands

Netscout OneTouch AT G2, User Manual

Search results

Summary of Contents for OneTouch AT G2

Reviews:

Related manuals for OneTouch AT G2

Brands by name

Popular brands