Netscout OneTouch AT G2 User Manual Download

Page: 262 / 396

OneTouch AT and OneTouch AT G2

User Manual

246

The

LOCATE

screen for Interferers is slightly different from the AP

or Client

LOCATE

screen.

Figure 104. Interferer LOCATE Screen



The Interferer icon indicates the type of interfering device,
along with the text description to the right of the icon.



The graph shows 5 minutes of signal data.

Note

If the Interferer you are locating becomes inactive, the

screen pauses until the OneTouch detects the next

active interferer of the same type and then resumes

graphing its signal.





Summary of Contents for OneTouch AT G2













































































































































































































































































































































































































Search results

Summary of Contents for OneTouch AT G2

Reviews:

Related manuals for OneTouch AT G2

Brands by name

Popular brands

Netscout OneTouch AT G2, User Manual

Search results

Summary of Contents for OneTouch AT G2

Reviews:

Related manuals for OneTouch AT G2

Brands by name

Popular brands