manualshive.com logo in svg

Netscout OneTouch AT G2, User Manual

Share
Download
Netscout OneTouch AT G2 User Manual Download Page 362

OneTouch AT and OneTouch AT G2

User Manual

346

RENAME

RENAME

 lets you change the name of a profile, AP authorization 

list, report, or screen. You must tap the 

MANAGE

 button and 

select a file in the list to make the 

RENAME

 button available.

The file’s extension cannot be changed using the built-in file 
manager. A file named LabNetwork.profile will retain the .profile 
extension even if you change its name. The file’s extension should 
not be changed using any file management tool. 

EXPORT

EXPORT

 lets you save a copy of the .pdf or .xml file to internal 

memory, an SD card, or a USB flash drive. Tap the 

EXPORT

 button 

to show the navigable file tree.

Figure 150. File Manager - Export File Tree

Navigate to the desired location and tap the 

OK

 button to save a 

copy of the file.

IMPORT

To import a profile, AP authorization list, report, or screen:

1

Put the file to be imported on an SD card or USB flash drives.

Tap to go
up one level

Tap to open

 

folder

Summary of Contents for OneTouch AT G2













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands