Netscout OneTouch AT G2, User Manual

Page: 309 / 396

Chapter 9: Tools
Testing Tools
293
1
Establish a wired or Wi-Fi Ethernet connection to your
network. You can use a copper or fiber connection at Port A,
or a copper connection at the management port.
2
On the HOME screen, tap TOOLS .
3
In the Testing Tools section, tap Browser .
4
Use the Web Server button to specify the target server.
5
Select the port you want to use for the browser connection:
the management port, the wired port (Port A, using copper or
fiber), or the Wi-Fi port.
6
Set Mobile to On to advertise to the web server that you are
on a mobile device. If available, you will receive content
formatted for the smaller screens of mobile devices.
7
Use the Proxy button to specify a server through which the
connection will be established.
8
Tap the LAUNCH button to launch the browser.
Swipe your finger across the display to pan across a web page.
Tap a text entry area to display the touchscreen keyboard.
Note
The browser does not support Flash or Java.
Browse to a Test Target from the HOME Screen
The browser can be launched from SETUP or RESULTS screens of
the following tests: DNS, Ping, TCP, HTTP, FTP, RTSP, SMTP. This
lets you test web connectivity to the configured servers.
1
Tap the test’s icon on the HOME screen.
2
Tap the wired analysis TOOLS button .
3
Tap the BROWSE button at the bottom of the screen. This
opens the BROWSER screen and populates the Web Server
field.
4
Tap the LAUNCH button.