Netscout OneTouch AT G2 User Manual Download

Page: 247 / 396

Chapter 8: Wi-Fi Analysis

Interferer Analysis

231



Peak Utilization



Average Power



Peak Power



Most Affected Channel

On interferer summary buttons, the sort key appears in bold
text.



The Sort Order button determines whether the sorted results
are shown in ascending

or descending

order.



The

REFRESH

button

clears all Wi-Fi analysis results and

restarts Wi-Fi analysis.

To Show Interferer Details



Tap an interferer to show its details.



Tap the interferer again to return to a summary view of

interferers.



Tap a different interferer to show its details. Only one

interferer’s details are shown at a time.

The sort key
is bold.

Summary of Contents for OneTouch AT G2













































































































































































































































































































































































































Search results

Summary of Contents for OneTouch AT G2

Reviews:

Related manuals for OneTouch AT G2

Brands by name

Popular brands

Netscout OneTouch AT G2, User Manual

Search results

Summary of Contents for OneTouch AT G2

Reviews:

Related manuals for OneTouch AT G2

Brands by name

Popular brands