manualshive.com logo in svg

Netscout OneTouch AT G2, User Manual

Share
Download
Netscout OneTouch AT G2 User Manual Download Page 236

OneTouch AT and OneTouch AT G2

User Manual

220

Tap the Channel Filter Button to show a summary of the 
channel the client is using. Tap the SHOW ALL 

 button 

to show all channels again.

Tap the AP Filter Button to show a summary of the AP the 
client is using. Tap the SHOW ALL 

 button to show all 

APs again.

Tap the Network Filter Button to show a summary of the 
client’s network. Tap the SHOW ALL 

 button to show all 

networks again.

This icon indicates the AP’s security level (i.e. the security 
method the client used to connect to the AP/network), and the 
type of security is indicated beside the icon. See 

page 199

 for a 

description of how the icon’s appearance changes based on the 
security level. Multiple icons are shown when multiple security 
types are in use

The AP to which the client associated

The Network to which the client is connected

This changes based on the selected sort key. This shows the 
client’s signal level (in dBm) as measured by the OneTouch 
analyzer, or the client’s utilization.

The presence of a Cross-link Discovery icon indicates device 
discovery during both Wi-Fi and Wired Analysis.

The Client’s highest observed 802.11 media type.

Summary of Contents for OneTouch AT G2













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands